2 Pack 35 mm Tripod Quick Release Plate Camera Tripod Mount Adapter, QR Release Camera Mounting Tripod Ball Head Parts Replacement for Quantaray Sunpak 5800d 7000tm Slik Walmart MX1000 QR-57 QB-4W

Price: $9.99
(as of May 27, 2024 02:09:13 UTC – Details)

Product Description

35 mm Tripod Quick Release Plate:

· NOT Universal, fits certain tripods only, Please measure your tripod shoe for compatibility.

· It should measure 1-3/8″ x 1-3/8″ (35mm x 35mm) to be compatible with this quick release plate.

· L * W * H: 35mm (1.38″) x Width 35mm (1.38″) x 15mm(0.59″)

· Base Size: 1-3/8″ x 1-3/8″ (35mm x 35mm)

· Color: Black

· Material: Plastic and Metal

· The tapered square base that fits into the tripod base is 1-3/8″ x 1-3/8″ (35mm x 35mm) dimensions on the bottom (that fits inside the opening in the mount head of the tripod).

· Compatible with WalMart MX1000 / MX 1000,Quantaray, Slik, Sunpak 5800d 7000tm,Sunpak 6400UT,Tripod Mount QR-57, ONLY CERTAIN Quantaray tripods, Please check compatible tripod list in below detail description

How to measure // Note: Our tripod is not universal

You must measure the size of the tripod opening head in both directions.

If you follow the incorrect measurement method shown in the picture on the left, your inner diameter of the tripod is only 35 mm. If you follow the correct measurement method in the picture on the right, you can obtain the correct size of your tripod.

So please measure your tripod size using the correct method before placing an order.

Find your tripod brand and model on the tripod leg or head.

check your compatible tripod models if in our list, if your tripod brand is not listed in our page, do not expect too much it to fit well.

Install Guides

According to the card position of the Pan/ Tilt/ Zoom, you could insert the mount quick release plates directly for installation. You could adjust the slotted screw with your fingers or tools. The quick release tripod mount adapter could be fixed to the camera base, facilitate the installation and disassembling of the tripod, save time and easy to use.

Warm Tips:Please make sure to measure your tripod size and read the model clearly before placing an order.Please measure your tripod receiver, it should be 35mm wide or 1 3/8″ and if the width inside the receiver is larger, then you will need a different plate. NOT universal, For use with certain tripods only.

Compatibility:

Compatibility: Fit Sunpak 6400UT, WalMart MX1000 / MX 1000 Tripod /X-638,CX-444, CX-888, CX-460, CX-460mini, CX-470, CX-570, CX-690, DF-50, VCT-D580RM, VCT-D680RM, VCT-R640,FHD52Q,D680,D580.

Tips: Our Tripod Quick Release Plates base size is standard as picture shown.

Please make sure to read the model clearly before placing an order.

Find your tripod brand and model on the tripod leg or head, check your compatible tripod models if in our list, if your tripod brand is not listed in our page, do not expect too much it to fit well. You must measure the size of the tripod opening head in both directions.

Please measure your tripod receiver, it should be 35mm wide or 1 3/8″ and if the width inside the receiver is larger, then you will need a different plate.

35 mm Black Tripod Quick Release Plates:

Please measure the tripod head to ensure compatibility even if your tripod is listed here :

1-3/8″ (35mm x 35mm)

Compatibility:

Slik SDV-550, SDV-30, SDV-540, Slik SDV-20, U6600, U5500, U6000, U8000, U9000, U7700, U5000, U873. (Does not it slik f730 tripod). It does not fit all slik tripods.Please measure the tripod quick release dimension before ordering.

Quantaray QSX-2001, QSX-7000TM, QSX-7001, QSX-6400, QSX-7500, QSX-6001, QSX-6601, QSX-6601TM, QSX-9002TM, QSX-8001, QSX-9001, QSX-9001UT. Please measure the tripod as there are multiple variants of Quantaray’s tripod.

OSN MX-350, OS150, OS250, OS500 Tripod (Replaces Part # QRP5 / QRP15), MX-1000 (Please measur see notes under Walmart).

Sunpak 2001UT (1st Generation only that is a Rrose gold color tripod). and Sunpak 8001UT. Please measure the tripod quick release dimension before ordering.

Sunpak Ultra 6000PG Tripod. Please measure this tripod model,as Sunpak produces models with different size heads with the 6000PG on the tripod leg.

Sunpak 7000TM, 5800D, 7001TM Tripods/Monopods (does not include level). Please measure this model of tripod, as Sunpak has had different variations on some of these tripods).

Sunpak Ultra Pro 777, Sunpak Ultra Pro 423 (does not fit pro 423px)

Sunpak 6400UT 6601UT 6601TM 6401UT 8001UT 7001UT Tripods. (Please measure this tripod model,as Sunpak produces models with different size heads).

WalMart MX1000 Tripod. Tips: There are multiple models of the MX1000, Some made by OSN or Walmart. Please measure your tripod to check compatibility, it should be 35mm wide or 1 3/8″, if the width inside the receiver is larger, then you will need a different plate.Please measure the tripod quick release dimension before ordering.

If your exact model of tripod is not listed here, then it will not fit.

35 mm Black Tripod Quick Release Plates: Base Size: 1-3/8″ x 1-3/8″ (35mm x 35mm). The tapered square base fits into opening mount of the tripod head measures 1 3/8” (35mm) across in both directions.Please measure your tripod receiver, it should be 35mm wide or 1 3/8″ and if the width inside the receiver is larger, then you will need a different plate.
Compatibility: Fit WalMart MX1000 / MX 1000,Quantaray, Slik, Sunpak 5800d 7000tm,Sunpak 6400UT,Tripod Mount QR-57, Please check compatible tripod list in below detail description. Please measure your tripod receiver, it should be 35mm wide or 1 3/8″ and if the width inside the receiver is larger, then you will need a different plate.
Tips: NOT Universal, fits certain tripods only.Please make sure to read the model clearly before placing an order.Find your tripod brand and model on the tripod leg or head, check your compatible tripod models if in our list, if your tripod brand is not listed in our page, do not expect too much it to fit well. You must measure the size of the tripod opening head in both directions.
Easy to Install: According to the card position of the Pan/ Tilt/ Zoom, you could insert the mount quick release plates directly for installation. You could adjust the slotted screw with your fingers or tools. The quick release tripod mount adapter could be fixed to the camera base, facilitate the installation and disassembling of the tripod, save time and easy to use.
Premium Material: The camera mount adapter plates is made of premium PVC material. The middle anti-twist locking screw is made of aluminum material. The surface is finely oxidized, durable and strong. With standard 1/ 4 inch screw, and the screws on the quick release mount bottom could help you install faster.